Skip to content Jump to the navigation menu


  • 1(current)
  • 2
  • 3
86 Products found
Key for jet regulator/-splitter (1 piece) 511324
Adaptor for the water outlet (aerator, jet splitter, spray disk) of most mixer taps. Fits with different sizes: M22x1 (without spanner flat), M24x1 (wrench size 22), M28x1 (wrench size 26).
SCOTCH-BRITE pad brown (rough) 160342
Polishing pad for slight usage marks.
SCOTCH-BRITE pad holder 139422
Holder for Scotch-Brite pads 139421 and 160342.
SCOTCH-BRITE pad red (fine) 139421
Polishing pad for slight usage marks.
Universal spanner for cartridge cover ring NF 139219
Spanner for cartridge cover rings (ACTIS/-S, ALTA, ALTA/-F/-S Compact, ALTA-S Compact Vario, ALTA-S-F Compact, ARCOS, CULINA-S, ELOS-W, FILO/-A/-S, FINESS, FONTAS/-A, KANTOS, LINEE/-S, LINUS/-F/-S, LINUS-S Hebel links / Vario, LINUS-S-F, MASTER, MASTER Control / ILUX, MASTER-S Duo / Duo Control / Profi / Semi-Profi, TALOS/-S, ZENOS/-S, ZIROS, ZIROS Control)
Box spanner Allen key AF 2 mm 139189
Allen key (2,0 mm) for headless set screw at the lever of the mixer taps (e.g. COMET-S since July 2002).
Box spanner Allen key AF 2,5 mm 139188
Allen key (2,5 mm) for headless set screw at the lever of the mixer taps.
Claw spanner (size 17 mm) 139187
Claw wrench (wrench size 17 mm) for clamping the mixer tap under the sink (for mixer taps with threaded bolt).
Claw spanner (size 14 mm) 139186
Claw wrench (wrench size 14 mm) for clamping the mixer tap under the sink (for mixer taps with threaded bolt).
Claw spanner (size 13 mm) 139185
Claw wrench (wrench size 13 mm) for clamping the mixer tap under the sink (for mixer taps with threaded bolt).
Socket wrench set hexagon 139184
Tubular key set for clamping of the mixer tap under the sink (for mixer taps with threaded bolt).
Key size: 6,7,8,9,10,11,12,13,14,15,16,17, 18, 19, 20, 22
Special tool for nuts on thread rods 139183
Special tool for clamping the mixer tap under the sink (wrench size ≤ 40).
Carbide hole saw Ø= 45 mm 139182
For drill holes in SILGRANIT sinks (Diameter 45 mm).
Adjustable belt spanner for cover ring 139181
Tool for opening and closing the cartridge nut (for all faucets).
Piercing tool 45 mm Ø 137002
Piercing tool for additional holes in stainless steel sinks (Diameter 45 mm).
Piercing tool 30 mm Ø 137001
Piercing tool for additional holes in stainless steel sinks (Diameter 35 mm).
  • 1(current)
  • 2
  • 3