Key for jet regulator/-splitter (1 piece)
511324
Adaptor for the water outlet (aerator, jet splitter, spray disk) of most mixer taps. Fits with different sizes: M22x1 (without spanner flat), M24x1 (wrench size 22), M28x1 (wrench size 26).
Special adhesive tape
146947
SCOTCH-BRITE pad red (fine)
139421
Polishing pad for slight usage marks.
no longer available since 02/2021
no longer available since 02/2021
Universal spanner for cartridge cover ring NF
139219
Spanner for cartridge cover rings (ACTIS/-S, ALTA, ALTA/-F/-S Compact, ALTA-S Compact Vario, ALTA-S-F Compact, ARCOS, CULINA-S, ELOS-W, FILO/-A/-S, FINESS, FONTAS/-A, KANTOS, LINEE/-S, LINUS/-F/-S, LINUS-S Hebel links / Vario, LINUS-S-F, MASTER, MASTER Control / ILUX, MASTER-S Duo / Duo Control / Profi / Semi-Profi, TALOS/-S, ZENOS/-S, ZIROS, ZIROS Control)
Box spanner Allen key AF 2 mm
139189
Allen key (2,0 mm) for headless set screw at the lever of the mixer taps (e.g. COMET-S since July 2002).
Box spanner Allen key AF 2,5 mm
139188
Allen key (2,5 mm) for headless set screw at the lever of the mixer taps.
Claw spanner (size 17 mm)
139187
Claw wrench (wrench size 17 mm) for clamping the mixer tap under the sink (for mixer taps with threaded bolt).
Claw spanner (size 14 mm)
139186
Claw wrench (wrench size 14 mm) for clamping the mixer tap under the sink (for mixer taps with threaded bolt).
Claw spanner (size 13 mm)
139185
Claw wrench (wrench size 13 mm) for clamping the mixer tap under the sink (for mixer taps with threaded bolt).
Socket wrench set hexagon
139184
Tubular key set for clamping of the mixer tap under the sink (for mixer taps with threaded bolt).
Key size: 6,7,8,9,10,11,12,13,14,15,16,17, 18, 19, 20, 22
Key size: 6,7,8,9,10,11,12,13,14,15,16,17, 18, 19, 20, 22
Special tool for nuts on thread rods
139183
Special tool for clamping the mixer tap under the sink (wrench size ≤ 40).
Adjustable belt spanner for cover ring
139181
Tool for opening and closing the cartridge nut (for all faucets).
Piercing tool 45 mm Ø
137002
Piercing tool for additional holes in stainless steel sinks (Diameter 45 mm).
Piercing tool 35 mm Ø
137001
Piercing tool for additional holes in stainless steel sinks (Diameter 35 mm).
Added to Your Shopping Cart
Product Availability by Store Location
Hours