Adaptor for the water outlet (aerator, jet splitter, spray disk) of most mixer taps. Fits with different sizes: M22x1 (without spanner flat), M24x1 (wrench size 22), M28x1 (wrench size 26).

Polishing pad for slight usage marks.

Holder for Scotch-Brite pads 139421 and 160342.

Spanner for cartridge cover rings (ACTIS/-S, ALTA, ALTA/-F/-S Compact, ALTA-S Compact Vario, ALTA-S-F Compact, ARCOS, CULINA-S, ELOS-W, FILO/-A/-S, FINESS, FONTAS/-A, KANTOS, LINEE/-S, LINUS/-F/-S, LINUS-S Hebel links / Vario, LINUS-S-F, MASTER, MASTER Control / ILUX, MASTER-S Duo / Duo Control / Profi / Semi-Profi, TALOS/-S, ZENOS/-S, ZIROS, ZIROS Control)

Hex key (2,0 mm) for headless set screw at the lever of the mixer taps (e.g. COMET-S since July 2002).

Hex key (2,5 mm) for headless set screw at the lever of the mixer taps.

Claw wrench (wrench size 17 mm) for clamping the mixer tap under the sink (for mixer taps with threaded bolt).

Claw wrench (wrench size 14 mm) for clamping the mixer tap under the sink (for mixer taps with threaded bolt).

Claw wrench (wrench size 13 mm) for clamping the mixer tap under the sink (for mixer taps with threaded bolt).

Tubular key set for clamping of the mixer tap under the sink (for mixer taps with threaded bolt).
Key size: 6,7,8,9,10,11,12,13,14,15,16,17, 18, 19, 20, 22

Special tool for clamping the mixer tap under the sink (wrench size ≤ 40).

For drill holes in SILGRANIT sinks (Diameter 45 mm).

Tool for opening and closing the cartridge nut (for all faucets).

Piercing tool for additional holes in stainless steel sinks (Diameter 45 mm).

Piercing tool for additional holes in stainless steel sinks (Diameter 35 mm).