FONTAS II Filter
FONTAS II Filter
- Comfortable 3-in-1-mixer tap with cold and warm water lever on the right, filtered water lever on the left
- Separate water circuit with extra spout for filtered water – no mixture with mains water
- Space-saving and practical: with the 3-in-1-tap no additional drilling is required for filtered water supply
- Spout can be swivelled through 360° for greater cover
- Surface finishes to perfectly match sinks and bowls
- Needs to be installed with a water filter system
raw material: brass
colour: satin gold
wall mounted: No | high/low-pressure: High Pressure | high spout: Yes
Article number 526692
Accessories
Recommended Accessoires
Data & Documentation
Data sheet & Documentation
- 2 spray types
- No
- 2-handle
- No
- archetype
- L-shape
- bridge
- No
- filter mixer tap
- Yes
- flow rate (actual) at 3 bar (l/min)
- 9 l
swivelRange
sideViewProduct2D
sideViewLever2D
BLANCO UNIT
Our BLANCO UNIT recommendations
FONTAS II in BLANCO UNIT
Models
Other FONTAS II Filter models
Care Products
Care products for your FONTAS II
Spare parts
Spare parts
| № | Image | Article numbers & descriptions |
|---|---|---|
2 |  | Jet regulator LAMINAR HP Caché M16,5 x 1 Art. ID: 121196 04/2022 |
3 |  | Key Caché yellow for TT Art. ID: 118970 04/2022 |
4 |  | Jet regulator filter water FONTAS II Art. ID: 122869 04/2022 |
5 |  | Jet regulator key for filter water FONTAS II Art. ID: 122870 04/2022 |
6 |  | Lever filter water FONTAS /-S II Art. ID: 124411 04/2022 |
6 |  | Short pin 20 mm for lever Art. ID: 124509 04/2022 |
7 |  | Valve core, locknut TRIMA / FONTAS II Art. ID: 121643 04/2022 |
8 |  | Locking screw M5x4 Art. ID: 120439 04/2022 |
9 |  | Cartridge HP 35 mm open K-35B Art. ID: 123475 04/2022 |
10 |  | Locknut cartridge TRIMA / FONTAS II Art. ID: 121644 04/2022 |
11 |  | Cartridge cover ring TRIMA, FONTAS II Art. ID: 124332 04/2022 |
12 |  | Lever FONTAS /-S II Art. ID: 124413 04/2022 |
12 | | Short pin 20 mm for lever Art. ID: 124509 03/2022 |
14 |  | Stabilization plate ORION / PALLAS / TERA / URANUS Art. ID: 126945 04/2022 |
15 |  | Assembly set TRIMA / ELOSCOPE-F Art. ID: 121653 04/2022 |
16 |  | Flex hose 50cm filter water ⅜-M8x1 Art. ID: 121654 04/2022 |
17 |  | Flex.hose 50cm ST R FI EU ⅜-M8x1 Art. ID: 123934 04/2022 |
17 |  | Flex.hose 50cm ST R FI EU ⅜-M8x1 Art. ID: 122473 04/2022 |
18 |  | Flex.hose 50cm ST B FI EU ⅜-M8x1 Art. ID: 123935 04/2022 |
18 |  | Flex.hose 50cm ST B FI EU ⅜-M8x1 Art. ID: 122472 04/2022 |
19 |  | Filter gasket for corner valve ⅜'' Art. ID: 118840 04/2022 |
 | Special tool for locknut cartridge TRIMA Art. ID: 121967 04/2022 | |
 | Hex key (key size 2.5 mm) Art. ID: 139188 04/2022 | |
 | Additional mixer taps stabilisation 60 mm Art. ID: 513383 04/2022 | |
 | Additional mixer taps stabilisation 75 mm Art. ID: 513384 04/2022 | |
 | Flexible sealing tape Art. ID: 120055 04/2022 |
